Even as cocktail games go, Nintendo's design leaves something to be desired as far as esthetics.Also of note are the large amount of bootleg versions of both Donkey Kong PCB's and cabinets themselves.

The cabaret cabinets are rather difficult to find, since they were not sold in large numbers (I would estimate less than 2,000). I would even willing to bet blue and red machines might have been rolling off the assembly line at the same time, at a certain point of production. These cupboards are designed as per the JAMMA wiring standards since the mid 1980s.It has an embedded monitor on the front and controls at around wrist level of the player and a coin slot a bit below the controls. Once Donkey Kong production officially started in earnest, two coin mechanisms would be the standard.With the release of Radar Scope we see the modified cabinet sides with a more traditional cut out approach allowing for non-playing patrons to see what is going on with the game. Des flammes te lécheront également les pieds et tu seras très prudent lors de ton sauvetage. These are 2-board sets that Nintendo put into production soon after the red cabinets turned to the more traditional blue color. A true no copyright bezel will be two pieces with a clear plexiglass front (the artwork will be printed on the reverse side) and a separate tinted plexiglass piece behind it. Once the versions with the marked copyright appeared, they had become one single piece of tinted plexiglass with the artwork applied. Learn More. It's an elegant design, but with a critical flaw for operators and arcade patrons. The accounting of all these variances might be due to Nintendo attempting to get as many of these games out the factory door as quickly as possible.A typical TKG2 version of Donkey Kong would have the "PP7-A” power supply (The same one found in non-converted Radar Scope machines) and a black isolation transformer in the bottom of the cabinet. The Multi-function Gaming Cabinet Plan,12. It has been reported that early Donkey Kong conversions in the factory from Radar Scope machine might not have even had side art. The coin door is also almost the same as what would be on the classic Donkey Kong style cabinets. - YouTube It has a backlit marquee hanging above the monitor.Its controls usually have several buttons and knobs for different activities and 1-2 joysticks, depending upon the types of arcade. Punch-Out!! After this short run of TKG3 machines in red were made (about 2,000 or so machines maybe? !, converted from Punch-Out!

Not only will you have a healthy dose of nostalgia when you start playing on your homemade machine, you are also going to have a sense of achievement in creating it yourself.There was a time when kids would save some of their lunch money so they could spend it on arcade games.You might have been a victim of these coin-hogging entertainment contraptions, but that won’t stop you from missing the experience. Il te faudra être habile et sauter au bon moment pour ne pas te faire écraser! - Coin door is made in aluminium. TKG4 sets included the 2nd version of the ROMS, which confusingly is known as Set 1. This was especially helpful for Nintendo games since the monitor sits slightly back from the front bezel at an angle under tinted plexiglass.

Sometimes they also include a sticker stating "Nintendo, Kyoto" with a hand written number on the sticker from the conversion on the metal connecting bracket. Sunday, February 24, 2008. There are however versions of Crazy Kong by the company Falcon (and others) that were officially licensed by Nintendo with several variations of the hardware they are based on.The basic design of the Radar Scope/Donkey Kong cabinet style would be reused for the games Donkey Kong Junior, and Popeye. Collectors of arcade games love Donkey Kong, and why not? It is possible that someone with the right parts could reproduce a red cabinet with great accuracy. TKG3’s are mostly all 7 slots with a few rare 5 slot versions being found. The truth is both of these versions were in production at the same time during the original cabinet manufacturing of Radar Scope and early Donkey Kong machines. The remaining Radar Scope cabinets would be reused and sold as the game which would make the foundation for Nintendo’s modern fortunes.

Later versions are a bit more "heavy duty" and will lock down much more securely. Some of its models have an overhanging marquee to allow the players for long time. I have seen many Donkey Kong style cabinets over the years with some hackery involving brackets of all types to prevent players from popping out the plexiglass bezels.Donkey Kong was also made available in a dedicated cocktail cabinet and a smaller cabaret sized cabinet for the US market. Neither of these games could be called a wild success, but they did debut the classic Nintendo arcade cabinet design for the first time with one slight variation. SAUTE avec la touche ESPACE.Solution et tutoriel vidéo du jeu Arcade Donkey Kong :Ci-dessus retrouvez la vidéo qui vous montre comment jouer au jeu Arcade Donkey Kong ainsi que sa solution complète.Donne une note à ce jeu (de 1 à 5 Manettes). Below is my best guess so far on this break down.Some collectors get very picky and excited about the number of speaker slots on the left side of the front of the cabinet. There are also a number of other variances regarding the coin bucket, how many coin mechanisms might be on the front, the number of insert coin stickers, and some other odds and ends we will get too. Frogger Arcade Cabinet. No more waiting for turns!The Geek Pub provides free plans for creating a retro arcade cabinet- detailing both electronic and woodworking requirements.